Bernina Club: Crazy Patchwork Stool

Today at Berrima Patchwork we had another fun filled Bernina Club Day. The students were working creating a crazy patchwork stool. The top of the stool was made using the basic crazy patchwork method of piecing and then was embellished with a variety of threads including a 12wt Sulky, King Tut threads and Supreriors' Metallic Threads. We then used a selection of couching methods to sew on thick braid, ribbons and decorative thick threads.

Below are a selection of the finished stool tops.

Dianne's and Gaye's Finished Stool Tops

Iain's and Jan's Finished Stool Tops

 

Kerry's Finished Stool Top and a sample stool that we made for the a frog loving friend.

A Sample Stool Top we made for the class

Attach the legs and you have a finished stool

Sewing Machine Troubleshooting Checklist

When your sewing machine just doesn’t seem to be sewing right what do you do? Below is a basic checklist that we recommend you run through.

1. Check you have your sewing machine plugged in, switched on and the foot control is in correctly (basic step I know but sometimes this is all that needs to be done)
2. Re-thread your machine. I re-thread my top and test the machine, if it is still not working, I re-thread my bobbin and check it. Are you using a decent type of thread – you pay for what you get, use a cheap thread often you will experience some problems. Have you wound the bobbin thread onto the bobbin correctly? Have you correctly threaded your machine?
3. If it still is not working properly the next thing I do is check your needle. Often people do not change their needles regularly. PLEASE CHANGE YOUR NEEDLE! You have spent a lot of money on your sewing machine, replacing a needle will cost you $1 or less, and your machine will be so very grateful for it. Check you are using the right type of needle for the job.
4. Check your machine tension. You can change your machine tension. If you are using a thicker thread then you will need to loosen your top tension, if it is a thinner thread then you might need to tighten your tension. If you can change you bobbin tension it is always best to change your top tension first before changing the bobbin tension.
5. Still not working? Give your machine a good clean – when was the last time you cleaned it? Does your machine need to be oiled – some machines do not however so do, if you are not sure check out your owner’s manual. That fluff around the feet dogs doesn’t belong there, if it looks like felt then it has been too long since you last cleaned your machine.
6. The above steps haven’t worked, then it is time to take it to your local machine repair shop and get it checked out.

If your machine makes a strange noise, gives off a puff of smoke, goes bang please don’t even attempt any of the above steps, just take it to your local machine repair shop and get them to check it out. Never take the outer shell off your machine, this could cause you warranty to be voided, take it to a machine repairer who knows what they are doing.

TUTORIAL: Circular Embroidery Attachement

Our first sewing machine tutorial is now available for viewing. All the sewing machines tutorials will be done on a Bernina Sewing Machine (that is the brand we sell) HOWEVER the information will still be relevant for other brands. The Circular Embroidery Attachment is one of my favourite accessories for you sewing machine - if you have never tried one out have a go they can be lots of fun.

 BERNINA CIRCULAR EMBROIDERY ATTACHMENT TUTORIAL

To view this tutorial please click the above link or

go to http://www.berrimapatchwork.com.au/tutorial/circularembroidery/

If there is a particular sewing machine foot or accessory that you are either have no idea what it does or unsure how to use it then let us know so that we can help you with a tutorial.